create revolved boss

Here we can learn to create revolved boss / bases, revolved cuts, or revolved surfaces.

Revolve feature can be a solid, thin features, or surface.

To create a feature revolved boss / bases, we can use the following guidelines:

Sketches for revolved solid feature can contain several profiles intersect.

By selecting the pointer Contour (available contour when we click the option in PropertyManager)

We can choose one or more sketches to create a revolve.

Sketches for features ranging from a thin or surface can contain several profiles intersect open or closed.

Profiles can not be cut off centerline, solid product will not be formed.

If the sketch contains more than one center, select the centerline that we want to use as the axis of revolution.

To revolved revolved surfaces and thin, the sketch can not be cut off at the centerline.

When we click a radius dimension to revolve, we can produce a radius dimension to revolve feature.

If we click the diameter dimension, we produce diameter dimensions to revolve feature.

We have to rebuild the model to display the symbol radius or diameter dimens

Read more........

Berbagi :

Anda mungkin menyukai postingan ini :

• 
  Design Cafe VIP Karaoke Room Mewah Elegant
• 
  Jasa Gambar 2D Denah Berwarna Photoshop Brosur Perumahan
• 
  Jasa Desain 3D Ruang Keluarga Living Room 2020
• 
  Desain Exterior Kantor Minimalis Estate Mangement Office